Understanding The Ftp Options - Lexmark X950 Series User Manual

Scanning
Using the ScanBack Utility
You can use the Lexmark ScanBack
the Lexmark Web site on http://support.lexmark.com.
1
Set up a scan‑to‑PC profile:
a
Launch the ScanBack Utility.
b
Select the printer.
If no printers are listed, then contact your system support person, or click Setup to manually search for an IP
address or host name.
c
Follow the instructions on your computer screen to define the type of document being scanned and what kind
of output you want to create.
d
Select any of the following:
•
Show MFP Instructions—View or print the instructions.
• Create Shortcut—Save this group of settings to use again.
e
Click Finish.
A dialog box appears with your scan profile information and the status of the received images.
2
Scan original documents:
a
Load all pages in the ADF or on the scanner glass.
b
From the printer control panel, navigate to:
Scan/Email > Profiles > select your scan profile > Submit
Note: The output file is saved in a directory or launched in the application you specified.

Understanding the FTP options

FTP
This option lets you enter the IP address for the FTP destination.
Note: Addresses should be in dot notation form (for example: yyy.yyy.yyy.yyy).
File Name
This option lets you enter the file name of the scanned document.
Original Size
This option opens a screen where you can choose the size of the documents for FTP sending.
•
Touch a paper size button to select that size as the Original Size setting. The FTP screen appears with the new setting
displayed.
•
When "Original Size" is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes.
•
When "Original Size" is set to Auto Size Sense, the scanner automatically determines the size of the original
document.
TM
Utility to create scan‑to‑PC profiles. The ScanBack Utility can be downloaded from
129