13. Others
The card is not recognized by the PC.
•
Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
•
If there are two or more USB terminal on a single PC, try connecting the USB connection cable
to another USB terminal.
The card is not recognized by the PC.
(SDXC memory card is used.)
•
Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
•
A message prompting to format the card may be displayed when connecting, but do not format.
•
If the [Access] displayed on the monitor does not disappear, disconnect the USB connection
cable after turning this unit off.
The picture cannot be printed when the camera is connected to a printer.
•
Pictures cannot be printed using a printer that does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB Mode]. (P79,
The ends of the pictures are cut at printing.
•
When using a printer with a Cropping or borderless printing function, cancel this function before
printing.
(For details, refer to the operating instructions for the printer.)
•
When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be
printed.
The panorama picture is not printing correctly.
•
Since aspect ratio of a panorama picture differs from normal pictures, it may not always be
possible to print it correctly.
> Please use a printer that supports panorama pictures.
(For details, please see the operating instructions of your printer.)
> We recommend using the "PHOTOfunSTUDIO" software on the DVD (supplied) to adjust
the size of the still picture to the print paper size.
Others
When I shake the camera, I hear a rattling sound from the attached lens.
•
Depending on the lens you attach, it may move inside and create a sound. This is not a
malfunction.
The camera makes a noise when this unit is turned on.
•
This is the noise of the Dust Reduction Function working (P395); it is not a malfunction.
344)
392