6. Shutter and Drive Settings
Selecting pictures from 4K burst file and saving
•
The picture will be saved in JPEG format.
•
The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
Setting [Playback Mode] in the [Playback] menu to [4K PHOTO] enables you to play
back only 4K burst files and pictures created from them.
4K burst files recorded with [
4K burst files recorded with [
4K burst files recorded with [
4K burst files recorded with [
1
Select a 4K burst file on the playback screen, and
press 3.
•
4K burst files are displayed with [
•
You can also perform the same operation by touching the
icon [
].
•
The slide view screen for selecting pictures will be
displayed. It takes a few seconds until the screen is
displayed.
2
Touch and drag the frames to select the frame you want to save as a picture.
•
You can also perform the same operation by pressing 2/1.
When you select pictures from any 4K burst file with long burst time, we
recommend that you make a rough selection of scenes using the 4K burst playback
screen, and then select the desired frame which you want to save as a picture by
using the slide view screen.
<Slide view screen>
Position of the
displayed frame
] ([4K Burst])
] ([4K Burst(S/S)])
] ([4K Pre-Burst])
] ([4K Burst]) or [
].
Fn2
Fn1
185
P185
P185
P188
] ([4K Burst(S/S)])