5. Focus and Brightness (Exposure) Settings
When selecting [
You can adjust the size and position of the area in the
vertical direction for [
[
], and in all directions for [
Button operation
3/4/2/1
/
[DISP.]
When selecting [
Touch operation
Drag your finger over the parts you want to set as AF
areas.
•
If you touch one of the selected AF areas, the selection of
the area will be canceled.
Button operation
Press 3/4/2/1 to select the AF area, and then press [MENU/SET] to set (repeat).
•
The setting is canceled when [MENU/SET] is pressed again.
•
If you press [DISP.], all the selections will be canceled.
6
Press [Fn2] ([Q.MENU]).
A Function button [Fn2]
Registering the set AF area to [
∫
1
On the screen in step
2
Press 3/4 to select a destination to which the setting will be registered, and
press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
•
Settings registered to [
•
Turning off this unit will return the setting adjusted with [
setting.
•
If you press a cursor button when [Direct Focus Area] in the [Custom] menu is set to [ON], the
AF area setting screen will be displayed.
]/[
]/[
]
], in the horizontal direction for
].
Touch
operation
Touching
Pinching in/out
[Reset]
]/[
]/[
]
FREE
] or [
3
on P148, press 3 .
]/ [
] will be stored even after this unit is turned off.
Description of
operation
Moves the
position
Changes the size
(3 levels)
Restores the
default setting
]
]/[
]/[
149
A
] back to the default
]/[
FREE