11. Using the Wi-Fi/NFC Function
Using the NFC function to easily transfer images on the camera
A Wi-Fi connection using NFC function is possible by touching the smartphone to this unit,
and you can easily transfer images displayed on the screen.
An image can be sent on site immediately after taking it, so you can easily send it to the
smartphone
¢
of your family or friend.
¢ Installing the "Image App" is required for use.
The NFC function is not available for iOS devices (iPhone/iPod touch/iPad).
Preparation:
Set [NFC Operation] to [ON].
Set [Touch Sharing] to [ON].
1
Play back the picture in the camera.
2
Launch "Image App" on the smartphone.
•
If a message appears stating that a camera
search is in progress, close the message.
3
While [
] is displayed on the connection
screen of the "Image App", touch the
smartphone to [
•
It may take time to complete the connection.
•
If a connection attempt by touching fails, restart
the "Image App", and then display the screen
2
in step
again.
•
To transfer more than one image, repeat steps
1
3
and
.
(They cannot be transferred as a batch.)
•
Depending on the environment you are using, it may take a few minutes to complete the image
transfer.
(P331)
(P331)
] of the camera.
299