Panasonic LUMIX DMC-GX8 Owner's Manual For Advanced Features page 72

2. Getting Started/Basic Operations
•
Some functions cannot be used depending on the mode or displayed screen.
•
When using [Ex. Tele Conv.] (still pictures), check that [Picture Size] is set to [M] or [S].
•
When set to [Focus Area Set], it is possible to display the position setting screen of either AF
area or MF Assist.
•
When [1 Shot RAW+JPG] is set, it will record the RAW file and a fine JPEG image
simultaneously once only. It will return to original quality after recording.
•
When [1 Shot Spot Metering] is set, it will record with [Metering Mode] set to [
only. It will return to original Metering Mode after recording.
•
Operations of the cursor button and [MENU/SET] are disabled when [Cursor Button Lock] is
set. Press the function button again to enable them.
•
When [Restore to Default] is set, function button settings return to the default configuration.
Not available in these cases:
•
[Fn1] is not available when recording with [
•
[Fn5] cannot be used in the following cases.
–
When using [Multi Exp.]
–
When using [Time Lapse Shot]
•
[Fn7] cannot be used in the following cases.
–
Intelligent Auto Mode
–
Intelligent Auto Plus Mode
–
Creative Control Mode
•
[Fn8], [Fn9], [Fn10], [Fn11], and [Fn12] cannot be used when the viewfinder is in use.
Making the function button settings for playback
You can directly set an assigned function to a selected image by pressing the function
button during playback.
•
The following functions can be assigned to the button [Fn1], [Fn2], [Fn4], [Fn5], [Fn6], [Fn7] or
[Fn13].
–
[Favorite] (P280): [Fn2]
–
[Print Set] (P281)
–
[Protect] (P282)
¢ Function button settings at the time of purchase.
•
When [Restore to Default] is set, function button settings return to the default configuration.
[Playback] Menu/Playback functions
¢
72
] ([4K Burst(S/S)]) of 4K Photo.
–
[Delete Single] (P259)
–
[Off]: [Fn1] ¢ /[Fn4]
[Fn13] ¢
–
[Restore to Default]
] (spot) once
¢ /[Fn5] ¢ /[Fn6] ¢ /[Fn7] ¢ /