[Flash Adjust.] - Panasonic LUMIX DCG100VGNK Operating Instructions Manual

Table of Contents

Advertisement

• When taking pictures with flash with the lens hood attached, the lower
portion of the photo may turn dark and the control of the flash may be
disabled because the photo flash may be obscured by the lens hood. We
recommend detaching the lens hood.

[Flash Adjust.]

Adjusts the flash output if a picture taken using the flash is too bright or
too dark.
1
Select [Flash Adjust.].
[
Adjust.]
2
Press
output and then press
• It can be adjusted within the range of
[–2 EV] to [+2 EV] in 1/3 EV steps.
• When the intensity of the flash is adjusted, [+] or [-] is displayed on the flash
icon.
• For information about adjusting the flash output when recording using a
wireless flash, refer to page 236.
• [Flash Adjust.] cannot be used when [Wireless] is set to [ON].
]
[Flash]
[Flash
to adjust the flash
.
9. Flash
231

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dc-g100Lumix dcg100kgnkLumix dc-g100k

Table of Contents