Flash - Panasonic LUMIX DMC-GX8 Owner's Manual For Advanced Features

8. Stabilizer, Zoom and Flash
Changing the settings for a power zoom lens
Applicable modes:
Sets the screen display and lens operations when using an interchangeable lens that is
compatible with power zoom (electrically operated zoom).
•
This may only be selected when using a lens that is compatible with power zoom (electrically
operated zoom).
•
The interchangeable lenses (H-FS14140/H-HS12035/H-FS1442A) are not compatible with
power zoom.
(For compatible lenses, please refer to our website.)
> [Custom] > [Power Zoom Lens]
MENU
When you zoom, the focal distance is
displayed and you can confirm the zoom
[Disp Focal position.
Length] A Focal distance indication
B Current focal distance
[ON]/[OFF]
When you operate the zoom with this setting
[ON], the zoom will stop at positions
corresponding to predetermined distances.
C Step zoom indication
[Step Zoom]
•
[ON]/[OFF]
When you turn this unit on, the zoom positions when you last turned this unit
[Zoom Resume] off are automatically restored.
[ON]/[OFF]
You can set the zoom speed for zoom operations.
•
[Photo]:
[Zoom Speed]
[H] (High speed)/[M] (Middle speed)/[L] (Low speed)
[Video]:
[H] (High speed)/[M] (Middle speed)/[L] (Low speed)
This may only be selected when a power zoom-compatible lens with a zoom
lever and zoom ring is attached.
[Zoom Ring] When set to [OFF], the operations controlled by the zoom ring are disabled
to prevent accidental operation.
[ON]/[OFF]
This setting does not work when recording
motion pictures or 4K photos with [
Pre-Burst]).
If you set [Step Zoom] to [ON], the zoom speed will not change.
] ([4K
224
B
A
C