Setting Tag Channels; Starting A Scan; Scan Operation - Icom IC-M87 Instruction Manual

■ Setting tag channels

For more efficient scanning, add desired channels as tag
channels or clear tag channels for unwanted channels. Non-
tag channels will be skipped during scanning. Tag channels
can be assigned to each channel group
dently.
q Select the desired channel group
[DIAL] for 1 sec., if desired.
w Select the desired channel to set as a tag channel.
e Push both [Y] and [Z] for 1 sec. to set the displayed chan-
nel as a tag channel.
• "TAG" appears in the function display.
r To cancel the tag channel setting, push both [Y] and [Z]
for 1 sec.
• "TAG" disappears.
• Clearing all tag channels in the selected channel group
While pushing and holding both [Y] and [Z], turn power ON
to clear all tag channels in the channel group.
[Example]: Starting a normal scan.
indepen-
(INT, USA)
by pushing
(INT, USA)
Push Scan starts.
DUAL

■ Starting a scan

Set the priority scan function, scan resume timer and auto
scan function in advance, using SET mode. (p. 18)
q Select the desired channel group (INT, USA) by pushing
[DIAL] for 1 sec., if desired.
w Push [SCN•
] to start priority or normal scan.
DUAL
• "SCAN" blinks in the function display.
• "16" appears during priority scan.
• When a signal is received, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to SET mode
setting. (Channel 16 is still monitored during priority scan.)
• Push [Y]/[Z] to check the scanning tag channels, to change the
scanning direction or resume the scan manually.
e To stop the scan, push [SCN•
• "SCAN" disappears.
• Pushing [PTT], [16• ] or [DIAL] also stops the scan.
C
Scan pauses when receiving
a signal and audio is emitted.
5

SCAN OPERATION

].
DUAL
Push
DUAL
to stop the scan.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
14