Datapath Image4 User Manual page 12

ContinuetoconnectthegenlockcablesJ3(Out)toJ2(In)untilallcardsareconnected.
Connectthescreenstothecards.Thefirstcardshouldbeconnectedtothefirstgroupoffourscreens;the
second should be connected to the second group of four screens and so on.
Switch the screens on then switch the machine on.
Log on as a user with administrative access rights.
The Found New Hardware Wizard will announce that new hardware has been found. This will happen
once for each slave Image4 card you have added to the system. Do not use the Found New Hardware
Wizard to install the Image4 drivers.
TheWindowsdesktopshouldappearonthefourscreensattachedtothefirstcardasitdidafterthe
displaydriverhadbeeninstalledforthefirstImage4card.
You need to install the display driver again. This time you should specify the number of screens you wish
to use.
Restart the machine.
TheWindowsdesktopshouldnowbespreadacrossthenumberofscreensyouspecified.