Injectors - MOTO GUZZI Breva 1100 Service Manual

Electronic injection
Electronic injection

Injectors

The command sent by the computer is of the
pulsating type. This will determine the
movement of the center part of the solenoid,
revealing the opening of the injector
With a constant fuel pressure determined by
the regulator, present on the pump, of 3±0,2
,
bar the quantity injected depends exclusively
of the opening time of the injector
Power supply 12V
Resistance 14 Ω ± 2 at 20°C
: fuel circuit
: fuel circuit
65