Samsung MultiXpress X740x Series User Manual page 324

Admin Settings
15
Initial settings (administrator only)
You can change the initial settings when you first turn the machine on.
If you want to stop adjusting the initial settings, press Exit. The settings you
have set so far will be saved. However, the Exit button is not enabled if it's
the first time using this option.
• Language: Select the language to use on the display screen then tap Next.
• Note: Read and tap Next.
• Administrator Account: Input the Name, New Password, Confirm
Password.The admin is entered as a default in Name field.
• Date & Time: Set the Date, Time, Time Zone, date and hour format, and
Day light Saving.
Example for selecting the time zone, select your country area.
• Device Attribution: Remove the existing device name and enter the device
name you want to use. then tap Next. Keep in mind to enter the device
name to be used on the network.
• If necessary, enter the location of the machine in the
• If necessary, enter the information in the
person to contact when any problem occurs on the machine.
• Verify Connections: Tap the Test button to verify the Ethernet Card
connection. When Connected appears after tap the Test button, press
Next.
If Not connected appears, make sure that the machine is connected to the
network then verify the LAN connection again.
• If a network connection problem persists, contact your network
administrator.
• If you installed an optional fax kit or finisher, press each
verify connection of them.
• Network Settings: Enter the IP address, Subnet Mask, Gateway, Host
Name, Domain Name, Primary DNS Server and Secondary DNS Server in
each field. Then tap Next.
• If a new IP address is assigned automatically by a DHCP or BOOTP, press
DHCP or BOOTP.
• If you are not sure about your network environment, contact your
network administrator.
Location
Administrator field for the
Test
2. Advanced Features for Settings Menu
field.
button for
324