Configuring The Machine's Wireless Network - Samsung MultiXpress X740x Series User Manual

Wireless network setup (Optional)

Configuring the machine's wireless network

Before starting you will need to know the network name (SSID) of your wireless
network and the network key if it is encrypted. This information was set when
the access point (or wireless router) was installed. If you do not know about your
wireless environment, please ask the person who set up your network.
To configure wireless parameters, you can use SyncThru™ Web Service.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable connection
status.
Check whether or not the network cable is connected to the machine. If
1
not, connect the machine with a standard network cable.
Start a web browser such as Internet Explorer, Safari, or Firefox and enter
2
your machine's new IP address in the browser window.
For example,
3 Click Login on the upper right of the SyncThru™ Web Service website.
Type in the ID and Password.
4
Use the same login ID, Password, Domain as when logging in from the
machine (see "Log-in" on page 311).
5 When the SyncThru™ Web Service window opens, click Network
Settings.
6 Click Wi-Fi > Wizard.
7 Select the one Network Name(SSID) in the list.
8 Click Next.
If the wireless security setting window appears, enter the registered
password (network password) and click Next.
The confirmation window appears, please check your wireless setup. If
9
the setup is right, click Apply.
16
Turning the Wi-Fi network on/off
1 Check whether the network cable is connected to the machine. If not,
connect the machine with a standard network cable.
Start a web browser such as Internet Explorer, Safari, or Firefox and enter
2
your machine's new IP address in the browser window.
For example,
3 Click Login on the upper right of the SyncThru™ Web Service website.
357
3. Network Setup