Samsung MultiXpress X740x Series User Manual page 261

Solving other problems
Condition Possible cause
The machine The port setting is incorrect. Check the Windows printer setting to
does not print.
The machine may be
configured incorrectly.
The printer driver may be
incorrectly installed.
The machine is
malfunctioning.
The document size is so big
that the hard disk space of
the computer is insufficient
to access the print job.
The machine The paper option that was
selects print selected in the Printing
materials from Preferences may be
the wrong paper incorrect.
source.
Suggested solutions
make sure that the print job is sent to
the correct port. If the computer has
more than one port, make sure that the
machine is attached to the correct one.
Check the Printing Preferences to
ensure that all of the print settings are
correct (see "Opening printing
preferences" on page 73).
Repair the machine software.
Check the display message on the
control panel to see if the machine is
indicating a system error. Contact a
service representative.
If printing GUI, make more hard disk
space available for your print job and try
printing the document again.
For many software applications, the
paper source selection is found under
the Paper tab within the Printing
Preferences. Select the correct paper
source. See the printer driver help
screen (see "Opening printing
preferences" on page 73).
Condition Possible cause
A print job is The job may be very
extremely slow. complex.
Half the page is The page orientation
blank. setting may be incorrect.
The paper size and the
paper size settings do not
match.
Suggested solutions
Reduce the complexity of the page or
try adjusting the print quality settings.
Change the page orientation in your
application. See the printer driver help
screen.
Ensure that the paper size in the printer
driver settings matches the paper in the
tray. Or, ensure that the paper size in
the printer driver settings matches the
paper selection in the software
application settings you use.
10. Troubleshooting
261