Fujitsu PRIMERGY TX300 S4 Start Manual page 5

12
When a confirmation message to restart
appears, click [Restart].
The system restarts and installs high reliability tools.
- Thus the Command Prompt windows may
appear and disappear during installation of
ServerView, the installation process is properly
proceeding.
- When using Microsoft media, the screen to enter
a product key may be displayed during OS instal-
lation. When the entry screen is displayed, enter
the product key again.
13
When a message notifies completion of
installation, restart the system.
For Windows Server 2008
The system automatically restarts when a message
notifies completion of installation.
After the system restarts, enter the password you
have set to log on.
For Windows Server 2003
Press the [Enter] key when a message notifies com-
pletion of installation.
Click [Start] - [Shutdown] to restart the system.After
the system restarts, enter the password you have set
to log on.
8
Turning off the power and installing optional devices
Install optional devices after the OS installation.
"Chapter 6 Installing Internal Options"
1
Check that no medium is inserted in
the floppy disk drive nor the CD/DVD
drive.
2
Exit the OS.
After the OS is exited, the server will be automati-
cally turned off. When the server is not turned off
after the OS is exited, press the power switch on the
front of the server.
3
Turn off the power supply of the periph-
eral devices such as a display.
4
Install optional devices.
14
Configure settings for the RAID man-
agement tool (ServerView RAID).
For details, refer to the manuals in Array Controller
Document & Tool CD.
Setting an array administrator account
A Windows user account is required when using
ServerView RAID. Create a group named "raid-
adm", and create an account with any name for an
array administrator within the group "raid-adm".
Setting HDD Check Scheduler
When using a SAS array controller card (MegaRAID
SAS), modify the settings of HDD Check Scheduler
if necessary. It has been set for 12:00 every day as a
default setting.
Setting Battery Recalibration Scheduler
When using a SAS array controller card (MegaRAID
SAS) together with a battery backup unit, modify the
settings of Battery Recalibration Scheduler if neces-
sary. It has been set for 11:00 on the first day of every
month as default.
15
Configure settings for ServerView.
Refer to "2.4 Setting after Installation" in "Server-
View User's Guide" to configure the necessary set-
tings.
- After optional devices are installed, set the BIOS
Setup Utility as required. For details about setting
procedures, refer to the "User's Guide Chapter 7
Configuring Hardware and Utilities".
- If an UPS device is installed, set the BIOS Setup
Utility as required. For details, refer to the "User's
Guide 4.5.3 Notes on Advanced Uninterruptible
Power Supply (UPS)".
When turning on the server again after turning it
off, wait for at least 10 seconds, and then press the
power switch.
If the server is turned on straight after being turned
off, an error will occur and may cause damage.
5