Separate the panel and the power interface
Separation : Insert the tip of a slotted head screwdriver into the split gap
indicated in the diagram. Pry up and down, and the wiring hole
will open. Then separate the panel and MPPI.48.
3.2 HDL BUS Pro Description
Connector Information
buspro
DC24V
COM
DATA-
DATA+
3.3
Commissioning
a)
On the button menu, long press the first and last button for 3 seconds, as shown
below.
b)
A new window will appear from the window, select "SYSTEM".
c)
In the new window, you will find a number of addresses from 001—107.
d)
Open the HDL-BUS Pro Setup tool.
e) Click the search button, it will show a new window, fill in panel's ID, and click the "+ADD"
button, then search for the panel. Clicking the "Add all" button, will add the panel to the
"ON-line devices" list.
DLP – User Manual
2
1
Red
Black
White
Yellow
User Manual
HDL-MPL8.48/MPL8.46
4