Faq - HDL MPL8.48 User Manual

User Manual
HDL-MPL8.48/MPL8.46
Please refer to the doc – "08- SB-HHR-D.ppt".
Download it from: ftp://59.41.255.150/HDL-BUS/HDL-BUS%20Training%20Course/
Training%20Course/
Date Time:
In this item, you can specify the ID of SB-DN-Logic960 and the correct time and then
long-press the key1 (or key2), "OK!" will then be shown, the clock in SB-DN-Logic960 is
now corrected. (SB-DN-Logic960 has a real time clock).
Language:
Choose language – 中文 or English.

6. FAQ

6.1 Panel FAQ001_HDL BUSpro
Q:
We can use DLP to arm and disarm HDL's security system (SB-DN-SEC250K), but how
can I prevent intruders to disarm my security system?
A:
You can set password to protect your security operation page on DLP (long press the first
and fourth buttons at the same time on SB-DLP,
long press the first/second and seventh/eighth buttons at the same time on
HDL-MPL8.48).
6.2 Panel FAQ002_HDL BUSpro
Q:
There are "single on/off" key mode and "combination on/off" key mode, we find that the
key with former key mode works correctly, the led indicator indicates
the on/off status correctly, but the latter one does not work that well, e.g., if I press the key
to turn on the loads, the loads are on and so is the key indicator,
no problem about that, but if now I use other keys to turn off the loads, the "combination
on/off" key indicator is still on, problem!
A:
When some of loads are on and some are off, then it is dilemma for the key indicator, so
DLP – User Manual 16