Ir And Other Functions; Test The Button Functions - HDL MPL8.48 User Manual

User Manual
HDL-MPL8.48/MPL8.46

4.2.9 IR and other functions

Infrared status
Allows a user to enable or disable the reception
Enable/disable the IR receiving function (accept HDL remote controller only)
Show temp
Enable/disable the DLP to display the temperature at the bottom of the LCD display.
Show time
Enable/disable the DLP to show the time at the bottom of the LCD display, the time is
broadcasted by SB-DN-Logic960.
Minimum dimming value
Set the dimming lower limit.
The Lower limit is useful if you would like to skip the low level segment and dim from a
certain level, say 40%. You want to skip it because maybe lower than 40% is impractical
for you or maybe the load quality is not so good and trembles when at low level segment.
Long press time
Set time for long-press, define the long press by end-user.
Double click time
Set time for double-click, define the double click by end-user.
4.2.10 Test the Switch
Test the key function in the software, rather than press the physical button.
DLP – User Manual 12