HDL MPL8.48 User Manual page 20

User Manual
HDL-MPL8.48/MPL8.46
the key indicator of this key mode is designed so that it just toggles
when you press it, that is all. However, there is a solution for the problem you met,
simply add one more command in your "other keys", i.e., "Panel control -> control button
status",
send this command to the "combination on/off" key to turn on or off the key indicator
directly.
6.3 Panel FAQ003_HDL BUSpro
Q:
I have three keys, all of them are set as "combination on" keys, and all of them are
configured to control the same two loads, but 30%, 50% and 80%, respectively.
After the configuration, I find that when I press the first key, loads are 30% and the key 1
indicator is on, when I go on to press the second key, the loads are 50%
and both key 1 and key 2 indicators are on, when I press key 3, loads are 80% and all of
the key indicators are on, this is not a problem, but for me, ideally, I would
like only one key indicator is on, which is the last one I pressed, is it possible?
A:
Yes, You can refer to FAQ2, another method is to set these three keys in "mutual
exclusion", mutual exclusion works just as you have described - only the last pressed
key is on, all the other indicators for mutual exclusion keys (which are in the same mutual
exclusion group) are off.
6.4 Panel FAQ004_HDL BUSpro
Q:
The HDL-MPL8.48 has four physical keys (well, 8, actually, left and right) and two physical
page-turning keys. I am trying to setup function like this: left key for dimming down,
right key for dimming down, is it possible?
A:
Yes, please follow the steps:
1) button 1 : mode single on
2) button 1 : single channel control ON
3) button 2 : mode single off
4) button 2 : single channel control OFF
5) put button 1 and 2 in a group,
use"Double key Merge,please refer to the screen shots.
DLP – User Manual 17