Uploading An Icon; Mutual Exclusion - HDL MPL8.48 User Manual

User Manual
HDL-MPL8.48/MPL8.46
4.2.5 Pic upload
To change the icon for a key, double click on a key and then click on the Pic Upload tab.
The inactive icons are represented by the left hand 'normal' column, the active icons are
represented by the right hand 'on' column.

4.2.6 Mutual exclusion

The key combination mode allows combination on, combination on/off, and mutual
exclusion groups to be set. After a mutual exclusion group has been set, only the last key
controlled can indicate its status (on), the status of other keys in mutual exclusion group
will be off.
The mutual exclusion groups can enable the scenarios described below,
Key1 control (combination on) channel1 and 2 with a dimming level of 30%
Key2 control (combination on) channel1 and 2 with a dimming level of 60%
Key3 control (combination on) channel1 and 2 with a dimming level of 90%
Pressing keys 1, 2, and then three, will set the keys three LED indicators of both channels
to 90%. If the mutual exclusion group is set to three keys, then the LED indicator of the
key last pressed will be on, while the other indicators are off.
DLP – User Manual 10