Dlp Setting Page - HDL MPL8.48 User Manual

User Manual
HDL-MPL8.48/MPL8.46
Backlight brightness: can change the backlight brightness.
Sleep mode:
In power save mode, if select "sleep mode", the first time to press the button, only lighten
the backlight, the second time to press the button will send out command; if unselect
"sleep mode", it will lighten the backlight and send out the command at the first time.
Note: the HDL-BUS Pro software version should be V10.18.03.08 or above.
Panel pages jump when on operation:
--Never jump: never jump after no operation in the designated time.
--Designate jump page: jump to the specific page after no operation in the designated
time

5. DLP Setting Page

Long press the first button (key1 or key2) and the fourth button (key7 or key8) to enter into
the setting page.
System:
Inside this item, long press the key1 or key2, you can modify the ID of the DLP (Subnet ID
and Device ID), other functions in this item are straightforward to set.
Password:
You can set password for each page, when user forgets his/her 4-digit password, he/she
can use the almighty password to unlock the page - 8465.
IR select:
DLP – User Manual 15