Needle Position Adjustment Lever - Pfaff 2438 plusline Instruction Manual

13

Needle position adjustment lever

.05.10
Requirement
The left and right throws of the needle must be the same size at the largest zigzag stitch
setting and at the left or right needle position.
Fig. 13 - 11
Loosen screws 1 and 2.
Set the needle position adjustment lever 3 to "middle" and the zigzag stitch adjustment
lever 4 at the largest zigzag stitch.
Place a piece of paper underneath the presser foot and perforate it to the left and right
with the needle.
Set the zigzag stitch adjustment lever 4 at "0" and move the needle position adjustment lever
3 to the right/left until the needle is exactly over the perforations made in the last step.
For the left needle-position bring screw 1 to a position where it touches and tighten it and
for the right needle-position do the same with screw 2.
3
2
4
Adjustment
1
13 - 12