Table of Contents
Advertisement
COMPONENT NAMES AND FUNCTIONS
Front
❶
➋
❶
Tripod Mounting Bracket Screw Hole : Used to fix the
Tripod Mounting Bracket .
＊
The camera have two hole at the top and bottom,
please according to condition to install.
The screw sizes for this hole are as follows:
➋
Mount Lens Adapter : Install this adapter to use a
CS-Mount Lens.
➌
Back Focus Control Lever :
Side
➍
Auto Iris Lens Connector :
Tripod is not supplied with the camera. Please check the installed documentation of
tripod for the installation of cameras.
Adjust focus by this Back Focus Control Lever.
Used to connect Auto Iris Lens plug.
➌
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)
➍
English_11
Advertisement
Table of Contents
