8
Mounting the upper V-belt guard
.01.04
3
Fig. 8 - 04
8
Mounting the bottom V-belt guard
.01.05
Fig. 8 - 05
1
2
Keystone Sewing Machine Company, Inc.
Installation and commissioning
If a large balance wheel is
used, the corner 1 of the belt
guard 2 must be broken out.
● Attach belt guard section 2.
● Attach belt guard section 3.
● Adjust bottom -V-belt guard 1 so that the
motor pulley and V-belt run freely.
Please note the instructions
in the operating manual of
the drive.
1
21