8
Adjusting the V-belt tension
.01.02
Fig. 8 - 02
8
Mounting the upper V-belt guard
.01.03
2
2
Fig. 8 - 03
Mounting and commissioning the machine
This step is eliminated for integrated sewing motors.
2 cm
2
This step is eliminated for integrated sewing motors.
2
1
2
Loosen nuts 1.
Tighten the V-belt with belt take-up
hanger 2.
Tighten nuts 1.
A quick motor is shown in
Fig. 8-02. If another motor is
used, carry out this step
according to the instructions in
the motor instruction manual.
1
Screw belt guard 1 onto the machine
housing with the screws 2.
8 - 2