Installation and commissioning
8
Adjusting the V-belt tension
.01.02
8
Mounting the upper V-belt guard
.01.03
20
This step is eliminated for integrated sewing motors.
Fig. 8 - 02
This step is eliminated for integrated sewing motors.
Fig. 8 - 03
●
●
●
2
1
●
●
●
2
1
Loosen nuts 1.
Tighten the V-belt with belt take-up han-
ger 2.
Tighten nuts 1.
A quick motor is shown in
Fig. 8-02. If another motor is
used, carry out this step accor-
ding to the instructions in the
motor instruction manual.
Break out the belt guard case 1 at the
points marked by the arrows.
Fasten belt guard 2 in holes 3.
Attach belt guard 4 to the machine case
with screws 5.
3
3