Advertisement
Fuji IP-10 Digital Passport System: Quick Reference Guide
28. Bend the leader strips at the
perforations to cleanly tear them
off of each side of the sheet.
31. Flip the sheet over and repeat
the alignment of the remaining
photo. Once positioned, press the
lever down to make the cut.
29. Insert the sheet into a Passport
Photo Cutter and align the photo
within the square opening.
32. Place the finished 2" x 2" photos
in a Passport Folder to protect and
keep them free of finger prints.
Copyright 2011 CFS Products, Inc. All rights reserved.
30. Once in position, press down on
the lever to activate the cutter.
24. Close the front tab top create a
professional presentation for your
customers.
Advertisement
