Connection To Ar2300/Ar5001D Receiver - AOR ARL2300 User Manual

4

Connection to AR2300/AR5001D receiver

■Receiver serial communication settings
If you have changed the receiver's serial communication settings from the default values, make
sure to revert to following:
Communication speed
Interface
Flow control
■Setting the receiver's DIP switches
After switching the receiver OFF, use a "minus" driver to put the S2 #2
dip switch into position ON, as described in this graphic >>
Warning: Changing dip switch settings while the receiver is ON
will cause a receiver malfunction!
AR2300: The power switch is on the front panel
AR5001D: Use the main power switch on the BACK of the receiver.
115200bps
USB priority, or AUX priority, or AUX only
none
Dip switch access for AR2300 (bottom of receiver)
7
S1 S2 S3