Port Settings - AOR ARL2300 User Manual

・Gateway
Gateway for ARL2300 according to the specific network environment. Leaving it empty is as
if you entered the values 0.0.0.0
・NameServer
NameServer for ARL2300 according to the specific network environment.
(Required for firmware update)

■Port settings

You need to open the following ports on your (NAT) router and to forward these ports to the
ARL2300. Receiver remote control will not function unless port forwarding is correctly initiated.
Please consult your router documentation on the procedure.
Each port number can be set to any value between 10001 and 65535.
・TCP Port
Port used to send the control commands to the receiver
・UDP Port
Port used for audio from the receiver
・Conf Port
Port used to access the ARL2300 settings through the browser
■Timeout
Set the range from 10 to 60 seconds, in 5 seconds steps.
If the command data from the client software is not received within the time set here,
ARL2300will cut the communication with the client.
12