Introduction - AOR ARL2300 User Manual

Introduction

Thank you for purchasing ARL2300.
The ARL2300 Ethernet Controller is an option for the AR2300 and AR5001D communication
receivers, which allows remote control and remote listening through the network.
The client software is based on the Java 2 platform and requires version 1.6 (Java SE 6 runtime)
or higher to be installed on the PC on which it is running.
The settings of ARL2300 can be easily changed through the local network (DHCP mode) by
using a browser, based on Apple's "Zero configuration" software Bonjour.
To obtain the best possible results from your ARL2300, we strongly recommend that you read
this manual and familiarize yourself with ARL2300.
As for any network related remote control device, a good understanding of LAN,WAN,
routers, IP addresses, port forwarding, etc... is necessary to set-up and use ARL2300.
Very importantly, you must be able to set-up port forwarding on your own router! Make
sure you have access to your router manual before going ahead in setting up ARL2300. As
there are hundreds of different router models on the market, with almost as many
different ways to configure them, AOR is unable to assist you in troubleshooting port
forwarding and network security issues.
Every effort has been made to make this manual correct and up to date. Due to continuous
developments of the device, we acknowledge that there may be some errors or omission
anomalies.
1