Table of Contents
Advertisement
■Current client connections
Here will be displayed the IP address of the currently connected client.
This is the display when no client is connected to ARL2300.
(*) While you access the settings page, the "current connection status" is not automatically
refreshed. In other words, you would not know if a client accesses ARL2300 while you are on the
settings page, unless you click the "Update information" button.
■Firmware update
The ARL2300 firmware can be updated online, using ports TCP 80 (HTTP) and 443 (HTTPS).
Make sure that your router does allow ARL2300 to access these ports; otherwise the firmware
update will fail. Please consult your router documentation on the port access procedure.
Please note that the online update might be impossible depending on your firewall and proxy
settings.
To proceed with the update, click on the "Move to ARL2300 firmware update page" link at the
bottom of the ARL2300 settings page.
Possibility #1: ARL2300 already has the latest firmware, in which case the following message
appears:
In this case just click on "Exit ARL2300 Firmware Update" to return to the settings page.
Force disconnect
Update information
15
Click this button to
force disconnection of
the currently connected
client.
Click to refresh the
current client
connection status (*).
Advertisement
Table of Contents
