Arl2300 Client Software; How To Use The Client Software - AOR ARL2300 User Manual

7

ARL2300 client software

Hardware & software requirements to run the client software:
Any PC running Java 2 (v.1.6 or later). See details below.
The client software is based on the Java 2 platform and requires version 1.6 (Java SE 6 runtime)
or higher to be installed on the PC on which it is running. For more information please refer to
http://java.com
The supplied ARL2300 client software only supports basic functions of VFO reception, over the
network and the internet. The current version does not support the receiver's advanced features
such as search, scan, simultaneous reception etc...
7.1

How to use the client software

◆ Do not execute the client software directly from the CD. You first need to copy the
software folder to your client PC.
◆ ARL2300 only allows one client connection at a time. If
somebody else is already connected when you try to
establish the communication, you will encounter this
"Busy!" error message.
◆ Cannot connect to host (ARL2300) message
Possible reasons for this error message are:
The IP address (or host name) for ARL2300 or its TCP
port number you entered in the client software, are
incorrect.
The IP address, when using dynamic DNS on ARL2300, has not been updates
If you can connect to ARL2300 but hear no sound, then most probably the UDP port number
is incorrect.
◆ Login incorrect
The user name and/or password you entered are
incorrect.
Entries are case sensitive.
18