General Precautions - ALLEN & HEATH MixWizard WZ3 12M User Manual

16 input 12 mix monitor console
Hide thumbs Also See for MixWizard WZ3 12M:
Table of Contents

Advertisement

Important Mains plug wiring instructions.
The console is supplied with a moulded mains plug fitted to the AC
mains power lead. Follow the instructions below if the mains plug has
to be replaced.
accordance with the following code:
TERMINAL
L
N
E
The wire which is coloured Green and Yellow must be connected to the
terminal in the plug which is marked with the letter E or with the Earth
symbol. This appliance must be earthed.
The wire which is coloured Blue must be connected to the terminal in
the plug which is marked with the letter N.
The wire which is coloured Brown must be connected to the terminal in
the plug which is marked with the letter L.
Ensure that these colour codes are followed carefully in the event of
the plug being changed.

General Precautions

Damage :
Environment :
Cleaning :
Transporting :
Hearing :
4
The wires in the mains lead are coloured in
European
LIVE
BROWN
NEUTRAL
BLUE
EARTH GND
GREEN & YELLOW
To prevent damage to the controls and cosmetics avoid placing heavy
objects on the control surface, scratching the surface with sharp objects,
or rough handling and vibration.
Protect from excessive dirt, dust, heat and vibration when operating and
storing. Avoid tobacco ash, smoke, drinks spillage, and exposure to rain
and moisture. If the console becomes wet, switch off and remove mains
power immediately. Allow to dry out thoroughly before using again.
Avoid the use of chemicals, abrasives or solvents. The control panel is
best cleaned with a soft brush and dry lint-free cloth. The faders, switches
and potentiometers are lubricated for life. The use of electrical lubricants
on these parts is not recommended. The fader and potentiometer knobs
may be removed for cleaning with a warm soapy solution. Rinse and allow
to dry fully before refitting them.
The console may be transported as a free-standing unit or mounted in a
rack or flightcase. Protect the controls from damage during transit. Use
adequate packing if you need to ship the unit.
To avoid damage to your hearing do not operate any sound system at
excessively high volume.
monitoring such as headphones and in-ear systems. Continued exposure
to high volume sound can cause frequency selective or wide range
hearing loss.
WIRE COLOUR
USA/Canada
BLACK
WHITE
GREEN
This applies particularly to close-to-ear
WZ
3
12M
User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents