Honda 2010 Ridgeline Owner's Manual page 58

10/01/26 18:31:53 31SZA620_057
Installing a Child Seat
To install a LATCH-compatible child
seat in the passenger's side seating
position of the third row:
1. Unlatch the detachable seat belt
anchor latch and retract the seat
belt all the way into the passenger's
side panel. Place the latch plate
and anchor latch in their holding
slots (see page 163 ).
52
LOWER ANCHORS
The location of each lower anchor is
indicated by a small button above the
anchor point.
You can find lower anchors in the
slits in the seat-backs.
2. Follow steps 1 through 4 of the
second row installation on pages
49 and 50 .
3. Lower the head restraint first.
Route the tether strap over the
head restraint and seat-back, then
attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
Push and pull the child seat
4.
forward and from side-to-side to
verify that it is secure.