Driving Position Memory System - Honda 2010 Ridgeline Owner's Manual

10/01/26 18:53:00 31SZA620_178
On Touring models
Your vehicle has a memory feature
for the driver's seat and outside
mirror positions.
Two seat and outside mirror
positions can be stored in separate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2).
You can change the ''MEMORY
POSITION LINK'' setting on the
multi-information display (see page
109 ).
Storing a Driving Position in
Memory
Store a driving position only when
the vehicle is parked.
Turn the ignition switch to the ON
1.
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
2. Adjust the seat to a comfortable
position (see page 154 ).
3. Adjust the outside mirrors for best
visibility (see page 171 ).

Driving Position Memory System

MEMORY BUTTONS
4. Press and release the SET button
on the control panel. You will hear
a beep. Immediately press and
hold one of the memory buttons (1
or 2) until you hear two beeps.
The indicator in the memory
button will come on. The current
positions of the driver's seat and
outside mirrors are now stored.
SET BUTTON
CONTINUED
173