Honda 2010 Ridgeline Owner's Manual page 103

10/01/26 18:40:21 31SZA620_102
Customize Settings
When the main menu displays
''Keyless Memory Settings ,'' you
can customize some vehicle control
settings.
To enter the customizing mode,
press the SEL/RESET button.
To change the settings, the ignition
switch must be in the ON (II)
position, and the vehicle must be
stopped with the transmission in
Park.
If you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, or move the shift lever out
of Park, the display will change to
the normal screen.
On Touring models
You can customize some vehicle
control settings for ''DRIVER 1'' and
''DRIVER 2'' separately. If ''DRIVER
1'' or ''DRIVER 2'' is not displayed,
customizing is not possible.
To have the driver's ID detected,
make sure your remote transmitter
TM
is linked to the system (see Keyless
Memory Settings on page
Multi-Information Display
Touring model is shown.
If you want the settings as they were
when the vehicle left the factory,
TM
153 ). select DEFAULT ALL, as described
on page
If you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button.
Refer to the table on the following
pages about the settings you want to
customize.
100 .
CONTINUED
97