Honda 2010 Ridgeline Owner's Manual page 56

10/01/26 18:31:33 31SZA620_055
Installing a Child Seat
RIGID TYPE
3. Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
50
FLEXIBLE TYPE
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
4. Whatever type you have, follow
the child seat maker's instructions
for adjusting or tightening the fit.
TETHER STRAP
5. Lift the head restraint (see page
157 ), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.