Honda 2010 Ridgeline Owner's Manual page 177

10/01/26 18:52:36 31SZA620_176
On EX-L models without navigation
system
When you shift to reverse with the
ignition switch in the ON (II)
position, the rear view is shown on
the left side of the inside mirror. For
more information, see page
There is also a sensor on the back of
the mirror. Items hung on the mirror
may block this sensor and af f ect its
perf ormance.
Adjusting the Power Mirrors
SELECTOR SWITCH
391 .
ADJUSTMENT SWITCH
1. Turn the ignition switch to the ON
(II) position.
2. Move the selector switch to L
(driver's side) or R (passenger's
side).
Mirrors
3. Push the appropriate edge of the
adjustment switch to move the
mirror right, left, up, or down.
4. When you finish, move the
selector switch to the center (off)
position. This turns the
adjustment switch off to keep your
settings.
171