Honda 2010 Ridgeline Owner's Manual page 245

10/01/26 19:04:11 31SZA620_244
Preset You can store up to 12
−
preset channels using the six preset
buttons. Each button stores one
channel from the XM1 band and one
channel from the XM2 band.
To store a channel:
Press the XM button. Either XM1
1.
or XM2 will show in the display.
2. Use the selector knob,
CATEGORY bar, or SCAN button
to tune to a desired channel.
In category mode, only channels
within that category can be
selected. In channel mode, all
channels can be selected.
3. Pick the preset button you want
for that channel. Press and hold
the button until you hear a beep.
Playing the XM Radio (EX-L and U.S. EX models)
4. Repeat steps 2 and 3 to store the
first six channels.
5. Press the XM button again. The
other XM band will show. Store
the next six channels using steps 2
and 3.
Once a channel is stored, simply
press and release the proper preset
button to tune to it.
The presets may be lost if your
vehicle's battery goes dead, is
disconnected, or the radio fuse is
removed.
XM Radio Display Messages
''LOADING'' XM is loading the
−
audio or program information.
The channel
''OFF AIR'' −
currently selected is no longer
broadcasting.
''UPDATING'' − The encryption
code is being updated. Wait until the
encryption code is fully updated.
Channels 0 and 1 should still work
normally.
CONTINUED
239