Using The Scoutbark100; Powering On/Off The Pet Collar Unit; Select Level Of Static Correction - Motorola SCOUTBARK100 User Manual

3. Using the SCOUTBARK100

3.1

Powering On/Off the Pet Collar Unit

Press and hold the POWER KEY
When powered on, the Indicator LED lights up in green for 3 seconds to indicate
that the unit is starting normal operation and is ready to be placed on your dog.
NOTE
After powering off the Pet Collar Unit, the smart system retains the last level of
static correction that your dog responded to, and use that correction level the
next time the Pet Collar Unit is powered on.
3.2

Select Level of Static Correction

Your SCOUTBARK100 is a smart bark detection device. If there is a bark from
your dog, it delivers static correction to discourage or stop your dog from
barking (see ""Free" Bark Duration" on page 13).
The Indicator LED flashes quickly in green and red when delivering static
correction.
1. Press and hold the STATIC CORRECTION KEY
for 3 seconds.
The static correction level indicator will blink.
2. Press the STATIC CORRECTION KEY
the level.
3. Press and hold the STATIC CORRECTION KEY
to confirm the level that you have selected on step 2 above.
4. Press the POWER KEY
The Static Correction Level Indicator on the Pet Collar Unit shows the
current level of correction (from 0 to 9).
Level Dog's Temperament
0
For Initial Training (delivers beep tone and vibration only)
1
For Initial Training
2 Mild
3 Mild to Average
4 Average
12
on the Pet Collar Unit to power it on or off.
again to increase or decrease
once to check the current level of correction.
on the Pet Collar Unit
for another 3 seconds
Using the SCOUTBARK100