Remote Control Jacks; Connection Of Ac Power Cable - Marantz PM6002 User Manual

CONNECTIONS

REMOTE CONTROL JACKS

The REMOTE CONTROL jacks are for connecting components that are capable of remote control such as
a Marantz CD Player or DVD Player. This enables these other components to be operated with the remote
controller included with the PM6002. The PM6002 comes with the system remote controller that can operate
the basic features of Marantz CD Players and DVD Players. Here, a brief explanation of how to control the
PM6002 and CD6002 using this remote controller is provided.
• As shown in the illustration below, connect the REMOTE CONTROL "IN" jack of the CD6002 to the
REMOTE CONTROL "OUT" jack of the PM6002, and set the CD6002 switch to "EXTERNAL".
• Both the PM6002 and CD6002 can be operated by pointing the remote controller at the receptor of the
PM6002.
AC IN AC IN
GND GND
PHONO PHONO TUNER TUNER CD CD AUX / DVD AUX DVD RECORDER 2 RECORDER 2 RECORDER 1 RECORDER 1
(MD (CD-R
MD / TAPE TAPE) CD-R)
L L
R R
IN IN OUT OUT IN IN OUT OUT
10
ANALOG OUTPUT ANALOG OUTPUT DIGITAL AUDIO OUT DIGITAL AUDIO OUT REMOTE CONTROL REMOTE CONTROL
R R L L COAXIAL COAXIAL OPTICAL OPTICAL
IN IN
EXTERNAL EXTERNAL
INTERNAL INTERNAL
OUT OUT
Set to "EXTERNAL"
SPEAKER SYSTEMS SPEAKER SYSTEMS
SYSTEM SYSTEM 1 1 : : 4 –16 4 –16 OHMS OHMS
SYSTEM SYSTEM 2 2 : : 4 –16 4 –16 OHMS OHMS
SYSTEM SYSTEM 1 1+ 2 : 2 : 8 8 –16 –16 OHMS OHMS
SYSTEM2 SYSTEM2
REMOTE REMOTE
R L
CONTROL CONTROL AC IN AC IN
MODEL NO. PM6002 MODEL NO. PM6002
IN IN
OUT OUT
R L
SYSTEM1 SYSTEM1

CONNECTION OF AC POWER CABLE

1.
Plug the power cable into AC IN jack on the back panel.
2.
Turn on the power switch of the audio unit (amplifier, etc.) that is connected with this unit. Set the selector
on the connected unit to this unit.
3.
Plug the power cable into an AC outlet.