Trimming - Marantz PM-15S1 User Manual

HOW TO USE AND SET FEATURES

TRIMMING

Trimming is a feature for adjusting left and right volume
balance.
Trimming is performed from the remote controller.
TRIM : This button starts trimming. When multiple PM-
15S1s are connected, this button selects the
amplifier with which to perform trimming. In such
case, trimming is performed in the order of the lowest
to highest ID number.
EXIT : This button ends trimming.
3 : This button increases the trimming level.
4 : This button decreases the trimming level.
2 : This button selects the R channel for trimming.
1 : This button selects the L channel for trimming.
ENTER: Not available for use.
OPEN/
CLOSE
PHONO
RECORDER 1
RECORDER 2
TRIM
L
DISPLAY
RANDOM
TOP MENU
AM/A
RC-11PMS1
18
SOUND
MODE
BALANCED CD
LINE 1
LINE 2
EXIT TONE
+
R
ENTER
- ATT
VOLUME
SCAN REPEAT
RETURN MENU
FM/B
The volume level of the left and right channels can be trimmed
in 0.5 dB steps across a 0.0 –9.0 dB range. When the PM-
15S1 is shipped from the factory, the volume level is set to 0.0
dB (maximum).
1.
Press the TRIM button once to access the LEVEL trimming
mode.
2.
The flashing "0.0" on the left indicates that trimming is
activated for the left channel volume level. Press the 3
and 4 buttons to set the volume level of the left channel.
Press the 2 button to set the right channel volume level.
3.
When the right side "0.0" starts flashing, trimming is
activated for the right channel volume level. Press the 3
and 4 buttons to set the volume level of the right channel.
4.
To trim the volume level of the ID 2 (slave) PM-15S1, press
the TRIM button again and set volume level as in steps 1 - 3.
After that, pressing the TRIM button again allows you to
trim volume level with ID 3 (slave) PM-15S1 and so forth.
5.
When finished with volume level trimming, press the EXIT
button.