Attachment Drive Belt Replacement - Ariens Sno-Thro 921038 Platinum 24 SHO Service Manual

See Figure 13.
17. Position support, such as a trash can, under
handlebars so tractor / frame remains upright when
separated from auger housing.
18. Chock or block wheels to prevent tractor / frame
movement when separated from auger housing.
See Figure 14.
19. Remove hardware securing auger housing to frame.
20. Tip auger housing apart from frame on mount rod and
separate housing from unit.
1
1. Tapping Screw
2. Mount Rod
Figure 13
2
Figure 14
ATTACHMENT DRIVE BELT
REPLACEMENT
Remove Attachment Drive Belts
NOTICE: Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Separate auger housing from frame. See Separate
Auger Housing From Frame on page 10.
See Figure 15.
4. Remove attachment drive belts from attachment drive
pulley.
1. Attachment Drive Belt
2. Attachment Drive Pulley
EN – 12
2
Figure 15
1