Graphics Configuration - Asus MAXIMUS VIII EXTREME User Manual

Graphics Configuration

Allows you to select a primary display from graphical devices.
Primary Display [Auto]
[Auto]
[IGFX]
[PEG]
[PCIE]
iGPU Multi-Monitor [Disabled]
Set this to enabled to empower both integrated and discrete graphics for multi-monitor
output.
Configuration options: [Enabled] [Disabled]
DMI/OPI Configuration
Allows you to configure the DMI/OPI settings.
DMI Max Link Speed [Auto]
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
PEG Port Configuration
Allows you to configure the PEG Port settings.
PCIEX16/X8_1
PCIEX16/X8_1 Link Speed [Auto]
Allows you to select the operating speed of the PCIEX16/X8_1 speed.
Configuration options:
[Auto]
[Gen1]
[Gen2]
[Gen3]
PCIEX8/X4_3
PCIEX8/X4_3 Link Speed [Auto]
Allows you to select the operating speed of the PCIEX8/X4_3 speed.
Configuration options:
[Auto]
[Gen1]
[Gen2]
[Gen3]
3-26
The primary display will be set to PCI-E when a PCI-E graphic
card is detected.
Force the primary display to be from the IGFX Graphics.
Force the primary display to be from the PEG Graphics.
Force the primary display to be from the PCI-E graphic cards.
The system will automatically select the PCIEX16/X8_1 slot speed.
The PCIEX16/X8_1 slot will run at PCI-E 1.0 speed.
The PCIEX16/X8_1 slot will run at PCI-E 2.0 speed.
The PCIEX16/X8_1 slot will run at PCI-E 3.0 speed.
The system will automatically select the PCIEX8/X4_3 slot speed.
The PCIEX8/X4_3 slot will run at PCI-E 1.0 speed.
The PCIEX8/X4_3 slot will run at PCI-E 2.0 speed.
The PCIEX8/X4_3 slot will run at PCI-E 3.0 speed.
Chapter 3: BIOS Setup