Setting Up Your Oc Panel Ii In Extreme Mode - Asus MAXIMUS VIII EXTREME User Manual

2.4.3

Setting up your OC Panel II in Extreme Mode

The OC Panel II in Extreme Mode is set up with an open chassis system or "open-air" OC
test bed assembly and enjoyed as a handheld console to perform overclocking and voltage
tuning.
When in Extreme Mode, you can utilize more features such as Subzero Sense and VGA
Hotwire. It also comes with some of the most commonly used voltage tuning presets that are
preconfigured for the optimum overclocking experience at your convenience.
Extreme Mode capabilities including V1, V2, DRAM, and other voltage definitions vary by
chipset. Please refer to your motherboard manual for details.
To setup the OC Panel II in Extreme Mode:
1. Shut down your computer.
2. Connect the OC Panel cable (A) and a SATA Power cable (B) to the OC Panel II.
3. Locate the ROG_EXT connector on the motherboard and connect the OC Panel cable.
4. Boot your computer.
5. Press the OC Panel II power button to turn on the OC Panel II LCM display.
2-24
Chapter 2: Basic Installation