Apm Configuration - Asus MAXIMUS VIII EXTREME User Manual

3.6.10

APM Configuration

ErP Ready [Disabled]
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled(S4+S5] [Enabled(S5)]
Restore AC Power Loss [Power Off]
[Power Off]
[Power On]
[Last State]
Power On By PCI-E/PCI [Disabled]
Allows you to enable or disable the wake-on-LAN function for the onboard LAN controller or
other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]
Power On By RTC [Disabled]
[Disabled]
[Enabled]
3-34
The system goes into OFF state after an AC power loss.
The system goes into ON state after an AC power loss.
The system goes into either OFF or ON state, whatever the system state
was before the AC power loss.
Disables RTC to generate a wake event.
Generates a wake event and configure the real-time clock (RTC) alarm
date.
Chapter 3: BIOS Setup