Advertisement
Available languages
Available languages
Individualization
48
Help window
You can use the help window to display a
selection of valid commands on the display.
You can switch the help function on or off in
System
the
menu in COMAND.
The components and operating principles of
COMAND can be found in the corresponding
operating instructions.
Switching the help window on/off
Press the W button.
X
or
System
Select
in the main function menu
X
bar.
The system menu appears.
Settings
Select
X
Help
Window.
Select
X
Switch the help window on O or off ª.
Individualization
Using individualization, you can fine-tune the
Voice Control System to your own voice and
thus improve voice recognition.
It is only possible to start individualization
with the vehicle stationary. After starting the
session, you will individualize the system
using voice instructions.
If individualization is activated, it may
i
affect the voice-recognition quality of other
users. Switch off individualization if it
impairs the voice-recognition quality of
other users.
Individualization comprises two parts. You
individualize the system for digits in the first
part and for specific commands in the second
part.
The system can be reset to the factory set-
tings at any time.
Individualization does not need to be
i
completed in full. Even individualizing the
Voice
Control.
Q
digits will result in a significant improve-
ment in the recognition rate. Individualiza-
tion can be stopped after the first part.
The components and operating principles of
COMAND can be found in the corresponding
operating instructions.
Starting new individualization
Press the W button.
X
or
System
Select
in the main function menu
X
bar.
The system menu appears.
Settings
Voice Control
Select
X
Q
Start New
Individualization.
You will see and hear a prompt, asking
whether you would like further information.
Yes
or No.
Select
X
If you select No, the first part of individu-
R
alization begins.
If you select Yes, you will see and hear
R
more information.
or
To close the display: press W the
X
COMAND controller.
You will hear a prompt asking whether you
would like to individualize digits or com-
mands..
At the end of the first part, a prompt will
appear asking whether you wish to begin the
second part.
Yes
or No.
Select
X
If you select No, individualization is stop-
R
ped. The data from the first part is stored
automatically.
If you select Yes, the second part will
R
begin.
Individualization is completed at the end of
the second part. You will see a message to
this effect. The data from the second part is
stored automatically.
Q
Advertisement
Chapters
