Help Window - Mercedes-Benz GT S 2016 Operating Instructions Manual

Individualization
48

Help window

You can use the help window to display a
selection of valid commands on the COMAND
display. The commands are hidden as soon as
you start to speak.
You can switch the help function on or off in
the System Settings
The components and operating principles of
COMAND can be found in the corresponding
operating instructions.
Switching the help window on/off
Press Vehicle
X
The vehicle menu is displayed.
To select System
X
turn and press the controller to confirm.
A menu appears.
To select Voice
X
the controller.
Select Help Window.
X
You have switched the help window on O
or off ª.
Individualization
Using individualization, you can fine-tune the
Voice Control System to your own voice and
thus improve voice recognition.
It is only possible to start individualization
with the vehicle stationary. After starting the
session, you will individualize the system
using voice instructions.
i
If individualization is activated, it may
affect the voice-recognition quality of other
users. Switch off individualization if it
impairs the voice-recognition quality of
other users.
Individualization comprises two parts. You
individualize the system for digits in the first
part and for specific commands in the second
part.
menu in COMAND.
in the main function bar.
Settings: slide 6,
Control: turn and press
The system can be reset to the factory set-
tings at any time.
i Individualization does not need to be
completed in full. Even individualizing the
digits will result in a significant improve-
ment in the recognition rate. Individualiza-
tion can be stopped after the first part.
The components and operating principles of
COMAND can be found in the corresponding
operating instructions.
Starting new individualization
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select System Settings: slide 6,
X
turn and press the controller to confirm.
A menu appears.
To select Voice Control: turn and press
X
the controller.
Select Start New
X
You will see and hear a prompt, asking
whether you would like further information.
Select Yes or No.
X
If you select No, the first part of individu-
R
alization begins.
If you select Yes, you will see and hear
R
more information.
At the end of the first part, a prompt will
appear asking whether you wish to begin the
second part.
Select Yes or No.
X
If you select No, individualization will be
R
canceled. The data from the first part is
stored automatically.
If you select Yes, the second part will
R
begin.
Individualization is completed at the end of
the second part. You will see a message to
this effect. The data from the second part is
stored automatically.
Individualization.