V
R
ario
oof R171
1.3.2
Side window area
1.3.2.1
Wind noises in the side window/rear side window area
Complaint:
Wind noises in the side window/rear side window area
Cause:
Wedge-shaped gap in the bar seal area (B-pillar)
between the side window and rear side window.
Adjustment of the rear side window is not OK.
Measure:
1. Treat the exterior C-pillar bottom seal with special antifriction agent,
part no. A 001 989 50 51 or A 000 989 36 60, see AF77.30-P-1501AG.
Observe the soaking time of the special antifriction agent.
2. Adjust rear side window, see GI72.10-P-020305 Release 3.0.
SSL: 6712442 Poor rear side window fit
Status July 18, 2006
– This printout will not be recorded by the update service. Status: 10 / 2006 –
T
T
roubleshooting
ree
Page 18/30