Troubleshooting - Currie tech IZIP Owner's Manual

Troubleshooting

Troubleshooting
Troubleshooting
INDICATOR LED...
Does not illuminate
Flashes red
Flashes amber
Flashes amber, then
immediately to solid green
For indoor use only.
Charge only Li-ion rechargeable batteries.
Charge in a well-ventilated area. Keep away from fl ames and sparks.
For more information, please see "Battery care & safety" on page 44.
EBCC Technical and Customer Service: +1 800-377-4532
High-power charger instructions.indd
High Power HP0180WL3 Battery Charger
Make sure your wall socket is working. Check the
charger power cord. If the charger still does not work, it
may need to be repaired or replaced. Do not attempt to
open the charger case yourself. Even if the charger is
unplugged, you could still be injured by an electric shock.
Make sure the charger is fully plugged into the battery.
Unplug the charger from the wall and from the battery. Wait
about 10 seconds, then connect to the battery, followed
by the wall outlet. If the indicator LED still fl ashes red,
there may be a problem with the battery or the charger.
The battery voltage is low, and the charger is attempt-
ing to raise it back to normal voltage with a low-current
charge. Leave the charger connected to the battery. If
the indicator still fl ashes amber after a few hours, the
battery may be damaged beyond easy repair.
No issue; the battery is fully charged.
SOLUTION
Last Modifi ed June 23, 2014 5:19 PM
73 73